|
Post by IsraeliRD on May 14, 2007 5:24:12 GMT
|
|
|
Post by IsraeliRD on May 14, 2007 5:24:27 GMT
The Internal Clock Race - 100% Accuracy assured!Think you have the slowest internal clock? Put it to the challenge! Submit your best times right here! Please do as I did below where I say my best time (TO 3RD DECIMAL PLACE) and my name/nickname. The times below give an estimate indication of where your marble should finish.DO NOT MOVE THE MARBLE AT ALL! Moving it might cause you to miss the finish and/or give you inaccurate results.Download it HERE and if this doesn't work... Download it here! (or copypaste to your address bar: marbleblast2.webs.com/The%20Internal%20Clock%20Race.zip ) The Internal Clock Race 1 - This is for the short levels, like Tornado Alley, Gravity Helix, Time Trial etc. The slower your clock, the more you're expected to get the first place on these kinds of levels. Sporlo - 7.877 Seconds Perishingflames - 7.878 Seconds Lonestar - 7.878 Seconds Moshe - 7.878 Seconds Technostick - 7.881 Seconds Matan (old comp) - 7.881 Seconds Josh - 7.881 Seconds Andrew Sears - 7.881 Seconds. Phil (PowerBook) - 7.886 Seconds Pascal (newer laptop) - 7.891 Seconds. Pascal - 7.906 Seconds Andrew Patterson - 7.906 Seconds Tech Geek - 7.906 Seconds Cardcaddy - 7.906 Seconds Oakster - 7.906 Seconds Unknown - 7.906 Seconds RadiantVibe - 7.906 Seconds Matan (new comp) - 7.906 & 7.907 Seconds Golden Marble - 7.907 Seconds Jase - 7.90x Seconds Uvodd - 7.90x Seconds Jeff - 7.93x Seconds The Internal Clock Race 2 - For medium sized levels where the clock sometimes comes in handy. Josh - 28.586 Seconds. Technostick - 28.586 Seconds Sporlo - 28.586 Seconds Moshe - 28.587 Seconds Andrew Sears - 28.588 Seconds Lonestar - 28.589 Seconds Perishingflames - 28.590 Seconds Matan (old comp) - 28.591 Seconds Pascal (2nd, faster, computer) - 28.592 Seconds. Phil (PowerBook) - 28.593 Seconds. Pascal - 28.609 Seconds Andrew Patterson - 28.609 Seconds Golden Marble - 28.609 Seconds Unknown - 28.609 Seconds Matan (new comp) - 28.609 & 28.610 Seconds. Jeff - 28.60x Seconds Uvodd - 28.60x Seconds Cardcaddy - 28.610 Seconds Oakster - 28.610 Seconds RadiantVibe - 28.610 Seconds Jase - 28.61x Seconds The Internal Clock Race 3 - For the longest of levels where we can see how much better you could've done had you had a good IClock. Perishingflames - 1:36:648 Minutes Matan (old comp) - 1:36.649 Minutes Josh - 1:36:650 Minutes Lonestar - 1:36.652 Minutes Sporlo - 1:36.653 Minutes Moshe - 1:36.653 Minutes Andrew Sears - 1:36.758 Minutes Uvodd - 1:37.xxx Minutes The following people were unable to finish the level due to a bug in MBG which caused their marbles not to trigger the 'End Zone' in the level. We believe they would have 1:36.xxx Minutes. Pascal, Andrew Patterson, Technostick, Golden Marble, Andrew Sears (managed once), Jeff, Jase (Assumed 1:37 Minutes), Tech Geek, Cardcaddy, Oakster, Phil, Unknown, RadiantVibe, Uvodd (once), Matan (new comp). The Internal Clock Race 4 - For people who cannot finish #3, this test will also check how better you could've gone for long levels. Matan (old comp) - Unknown, but assumed to be lower Matan (new comp) - 1:10.875 Minutes
|
|
|
Post by IsraeliRD on May 14, 2007 5:24:45 GMT
Marble Blast Campaign
Cancelled.
|
|
|
Post by IsraeliRD on May 14, 2007 5:25:31 GMT
One more reserved post.
|
|
|
Post by IsraeliRD on May 14, 2007 5:28:05 GMT
Final reservation post.
|
|
|
Post by Oaky on May 14, 2007 6:28:52 GMT
iClock Race 1 - 7.906 (now I have no hope of the WR for Tornado Alley!) iClock Race 2 - 28.610 iClock Race 3 - I bounced off the end pad. Oh and you need to add GMC. What other levels have you made Matan?
|
|
|
Post by Sporlo on May 23, 2007 1:55:44 GMT
The Internal Clock Race 1Sporlo - 7.877 Seconds Andrew Patterson - 7.906 Seconds ? This makes me soooooooooo angry!!!! Andy beat me at Time Trial!!! HOW!!!!!!! I SHOULD HAVE THAT RECORD! GRR his IC is sooooooooo bad at that one, but yet he got .001 seconds faster at the BIGGEST clock level! Therefore, Andy, you should try that again and see what you get. ----------------------------------------------------------------------------------- Oh yea, and what Oakster said, about ur other levels. (wait, do you have any others?) (i love my bad memory! )
|
|
|
Post by Oaky on May 25, 2007 4:03:28 GMT
The level that is the most dependant on iClock is Tornado Alley. It's impossible for me to get any lower then 2.781.
|
|
shoulan
Intermediate Marbler
[ss:Default Skin]
you shall all fall victim to the fuzzy demon of hell!
Posts: 124
|
Post by shoulan on Jun 20, 2007 13:42:03 GMT
ya really can you put down more level?
|
|
|
Post by technostick on Jun 20, 2007 14:49:09 GMT
Look in CLAV.
|
|
|
Post by Lonestar on Jun 20, 2007 17:16:20 GMT
These are all of Matan's levels, he doesn't have more to put up.
|
|
|
Post by Andrew on Jun 20, 2007 18:49:57 GMT
Actually there are more levels by Matan on these forums and on the GG forums. For example: Get High Gyrocopter Monster Course Great Divide - Pass it Yourself Great Divide - Pass it Yourself Revisited MBU's Great Divide Six Fold Race Tunnel Vision Don't Jump Suicidal Marble Suicidal Marble 2 Matan can add these when he wants, however.
|
|
|
Post by Lonestar on Jun 20, 2007 19:14:23 GMT
Oh, oops. I thought there was more than just ICR here.
|
|
|
Post by phil on Oct 8, 2007 10:41:22 GMT
Phil (PowerBook) IC 1 - 7.886 IC 2 - 28.593 IC 3 - Bounced off. Sorry about bump btw
|
|
|
Post by Lonestar on Oct 8, 2007 23:03:05 GMT
I just did them too ICR1 - 7.878 ICR2 - 28.589 ICR3 - 1:36.652
|
|
|
Post by phil on Oct 8, 2007 23:47:57 GMT
WHAT THE HECK. On IC1, I didn't move the camera at all, and on the PowerBook I get 7.90?! I think it could be also based on lag.
|
|
|
Post by moshe on Oct 29, 2007 1:09:56 GMT
sorry for bump
The Internal Clock Race 1.mis_0"] = "7878\tmoshe"; The Internal Clock Race 2.mis_0"] = "28587\tmoshe"; The Internal Clock Race 3.mis_0"] = "96653\tmoshe";
|
|
|
Post by slang on Oct 30, 2007 23:44:22 GMT
THE Internal Clock Race 1 :: 7.906 THE Internal Clock Race 2 :: 28.609 THE Internal Clock Race 3 :: Bounced OFF
|
|
|
Post by IsraeliRD on Nov 1, 2007 1:19:24 GMT
2 new levels released! Will update IC later
|
|
|
Post by technostick on Nov 7, 2007 19:03:59 GMT
Pipe Sniper won't load. I really liked Pipe World.
|
|
|
Post by Andrew on Nov 7, 2007 19:43:22 GMT
That's weird -- it works here fine. Did you put the interior in the right folder? Did you put in all the new textures?
|
|
|
Post by Mkbul on Nov 7, 2007 20:29:25 GMT
It doesn`t work for me too...
|
|
|
Post by Riblet on Nov 7, 2007 23:27:08 GMT
Does it freeze when the bar is half-way across? It does that for me, but if I leave it sit for 1-2 minutes it works fine, though it is a bit laggy at first. (Restarting the level destroys that, though.)
|
|
nosliw87
Beginner Marbler
[ss:Perishingflames Skin]
Harder, Better, Faster, Stronger
Posts: 28
|
Post by nosliw87 on Nov 9, 2007 21:48:57 GMT
IC1-> 7.90x IC2-> 28.60x IC3-> wont show up im my custom levels. weird....
btw both pipe levels were great even though i fail at them.
edit-> added x cause i dont know 3rd decimal...
|
|
|
Post by IsraeliRD on Nov 15, 2007 3:51:26 GMT
IC1-> 7.90x IC2-> 28.60x IC3-> wont show up im my custom levels. weird.... btw both pipe levels were great even though i fail at them. edit-> added x cause i dont know 3rd decimal... Go to marble blast gold/marble/client and open prefs.cs in textedit or notepad or wordpad or wherever.
|
|
|
Post by J@ckrb on Nov 15, 2007 7:50:13 GMT
IC1: 6.90x once IC2: 28.60x IC3: Can't finish I put x at the end because I can't find the levels in the prefs.cs.
|
|
|
Post by moshe on Nov 15, 2007 8:22:06 GMT
i hope you mean 7.90x i really do...
here is the mission name: $pref::highScoresmarble["/data/missions/custom/The Internal Clock Race 1.mis_0"]
|
|
|
Post by J@ckrb on Nov 15, 2007 16:42:57 GMT
I wasn't joking on IC1 time of 6.90 but I can't do it again for some reason. Still can't find IC1,2 and 3 in the prefs.cs. It's making me get worked up.
|
|
|
Post by Andrew on Nov 15, 2007 19:56:31 GMT
1.) Don't double post. 2.) The prefs.cs isnt in the package contents, but the library. Go to [username] -> Marbleblast -> marble -> client and open the prefs.cs in there.
|
|
|
Post by IsraeliRD on Jan 14, 2008 4:09:57 GMT
Updated the THIRD post with new info on an upcoming awesome new challenge with prizes!!!
|
|